You want to have order on your breadboard? You have whole lot of connection to make? This DIY is for you. This breadboard is in order. You don't believe me? What if I tell you that every cable has its pair of colours?
You need:
Few non-red, non-black 0,25 mm2 cables
0,5 mm2 Bootlace ferrules
Take every pair possible including pair of cables same colour, so blue-blue is also a pair.
Twist uninsulated end of a pair and crimp it.
Turn ferrule 90° and crimp it as in the picture.
Do that on four sides. If you do everything correctly you should have 0,7 mm pin, that should tightly fit in the board. I'd rather like it to be standard 0,65 mm. Should you know a method, that don't include grinding, please let me know.
That custom made cables should make you sure, that the cable won't fall and there will be only one cable of pair of colour.
And the most interesting part. If you want to connect LEDs to output pins via resistor, you can hide it in a cable like this.
This way you don't use precious fields on your board to put resistor in it.
The more radical way would be soldering board on a PCB, to connect it to some terminal blocks and put cable under the board. I have a lot time to think about it while doing other stuff.
Brak komentarzy:
Prześlij komentarz